How To Install Bonaire Durango Window Cooler

Durango 125 Evaporative Portable Libation
Owner's Manual

IMPORTANT
READ AND Save THESE INSTRUCTIONS.
lease keep this important manual anisate place tithe owner$responsibilitytoensure that regular maintenance is carried out on this evaporative cooling product.

General Safety information

Thank you for purchasing%quality Bonaire Evaporative Portable Cooler. We intendance about you safety and would ask you to spend a few minutes reading these simple instructions earlier operating this production.

Safety!

Read carefully prior to attempting to assemble, install, operate or maintain the unit.

Read and salve these instructions. D does not throw these instructions away
Consummate the unit assembly before attempting to operate
Interference with and performance of this libation in any further not prescribed by these instructions could crusade a safety event and WI4 void any warranty.

Alarm

Practise non use cooler om uneven or unstable surfaces
Do not overfill Employ water only
Do not operate cooler with lee it pee removed
Exercise not insert whatever strange objects or body parts into the air inlet or outlet, otherwise actual injury or belongings damage may occur
Practise non use immediately ajar0et to oestrus Sorce ch a $owes0 +aria/0.00%
Exercise non utilise immediately is adjacent to sources of water such as swimming pools, hot tub bathtubs, shoes,sinks0th liquid%
Do non operate this product near an open flame or the product may ignite and crusade fire, resulting in actual injury or property damage
Do non operate in areas where gar0ie at or other flammable liquids or vapors are used or stored.

WARNING

All electric. connections must comply with local construction and safe regulations and be performed by qualified personnel
The power cord should be connected direct t0 230040+10%, S1horse oil 8ruled GFC protected electrical receptacle Make certain that the ability switches are in the of position before connecting and operating our cooler Do not utilize this production with a solid-state Sped control device
Keep the cordawafeoe heated surfaces.
Practice not operate libation with a damaged cord, plug o other components
Practise not step0nor ell over the power cordite or sharp objects
Do not run the power cord under the rug or other flooring covering. Arrange cord away from traffic expanse where information technology volition non exist tripped over.
Practise non use the power cord with an adaptor plug that converts the 3-pin plug into a 2-prong connector.
If the power cord is damaged, it should be replaced past a service agent or qualified personnel to avoid the take a chance of bodily injury or property impairment.
Remove the plug from the electrical receptacle past pulling on the plug and not the string.
Use only qualified electricians for replacement or servicing of switches, or electric motors and components in this libation.
If damaged, discard libation or render to an authorized service facility for examination and/or repair.

Warning:

Always unplug the power string from the wall outlet receptacle when the air libation is non in use, earlier adding water, before cleaning, earlier removing the cooling pad, earlier maintenance and replacing parts, or before moving to another location.
Exercise not plug the cord into an electrical outlet with moisture hands or an electric daze may result.
The aforementioned applies to unplugging.
Never wash the unit cabinet with a garden hose. water may damage the motor and electrical system.
Never endeavour to disassemble or modify the product in any manner not instructed by this manual. Daze, fire, or actual injury may occur.
Practice non allow children to operate or service this libation.

WARNING:
Stagnant h2o may cause bacterial growth and serious health bug. Do non allow stagnant water to remain in the tank.

Drain and make clean the water tank before storage, after seasonal use, and whenever the unit is not in daily use.

Product Description

The Evaporative Air Libation is an efficient, energy-saving product. Information technology cools by combining h2o evaporation with air movement, through carefully designed and manufactured equipment, providing maximum efficiency and safety.
The evaporative cooling technology is very economical and gives a number of additional benefits compared to traditional air conditioning systems for homes and businesses. The organisation does not use refrigerants or compressors; it cools by just moving air through a surface composed of specially designed evaporative cooling pads.
The heat from the inlet air is captivated by the h2o. The resulting outlet air temperature drops when the water transforms into gas. Humidity is not perceived, since the air in the room is renewed approximately every ii minutes, while a comfy cooling consequence is created. Continuous air circulation is a vital aspect of the evaporative cooling process used in this equipment and gives information technology a distinct advantage over air conditioning by refrigeration.

Unpacking

Handle the unit with care. Visually inspect for shipping harm. If whatever part is damaged, immediately file a claim with the carrier.

i. Summit Panel	8. Cater bike
ii. Front Panel	9. Water level indicator
3. Command Pae	x. Side Panel
4. Horizontal louvers	eleven. Dust net
five. Water inlet door	12. Power cord
6. Water tank	thirteen. Ability cord winder
vii. Caster leg

Afloat valve facility is available in this model. This feature makes provision for automatic h2o filling of the cooler. Ensure proper connectedness of water inlet pipe into the bladder valve to avert leakage.
Note: Maximum h2o inlet pressure level 29 psi (200 kPa)

Drainpglgeateduecoole at the back
Pull off bleed plug to empty tan Ensure rain plugins fitted secure earlier re. fling tank

Electrical Connection and installation

Review and empathize the warnings in the General Prophylactic Information department, pages 3 & 4.

Leg Installation: Insert legs on both sides at the bottom. Fit using 6 supplied screws.
Attention: Ensure the castor wheels with brakes are at the front.
Install the cooler on a flat, level surface.
Adjustable Up and Down louver: The Up and Down Louvres can exist adapted using the protruded tab shown on Page v.
Add together clean water into the water tank. Check the water level window on the front of the libation to see when the h2o tank is full.
Plug the unit into a 230VAC (± 10%) 50 Hz, i phase GFCI protected grounded outlet.

Functioning

Command Pae& Remote Control

Ability (ON/OFF) [ ]: Bear on the button to turn ON/OFF the air cooler. If the unit is ON, the LED will blink continuously in white colour and will be on if the unit of measurement is ON.
COOL [ ]: Touch the button to switch ON/OFF the pump. If the pump is off, the LED will blink in white color and will be on if the pump is ON.
FAN [ ]: When Fan is ON, the Fan icon will glow, Touch the button for High, Mid, and Depression speed. The selected speed volition be indicated by 3, ii, and one as loftier speed, Med speed and depression speed, respectively.
SWING [ ]: Bear upon the push to switch ON/OFF the swing. If the part is OFF, LED will glimmer in white color and will exist on if the role is ON.
TIMER [ ]: Press the button to set OFF timer to 1-seven hours in intervals of 1 60 minutes. The timer icon will glow when the timer is switched ON and the glowing LEDs volition indicate the full time set.
Water Alarm []: If no h2o in the tank, H2o LED blinks continuously in white color and volition exist on if the h2o tank is full.

REMOTE CONTROL (Batteries non included): Open up the bombardment compartment at the back of the remote control and insert two new AAA dry prison cell batteries. Care must be taken to insert the batteries into the correct polarity (+/-) markings shown inside the battery compartment.
Air Renewal Requirements: When your cooler is working, it is important to leave a window or door open up in guild to keep a constant airflow and to avoid any accumulation of humidity and heat. Your Evaporative Cooler does not cool correctly when airflow is restricted from exiting a room. This causes a decrease in the cooling efficiency due to an increment in humidity. Therefore, an opening of at least ane square foot for every 500 CFM of injected air is required.

Maintenance

Warning
Stagnant water may cause bacterial growth and serious wellness problems. Do not allow stagnant water to remain in the tank. Drain and make clean the water tank earlier storage, after seasonal utilize, and whenever the unit is not used for a long time flow.

General Maintenance

Disconnect the power cord before servicing or maintenance.
Preventive maintenance is essential for the long and trouble-free life of an air cooler. Always ensure to switch OFF and unplug the air cooler from the power socket before cleaning.
Do not make loose wiring or apply inferior material in servicing or maintenance to avert fire hazards.
Please disconnect the ability supply earlier opening any comprehend to avoid injury due to rotating parts or electrical daze.
To clean the tank, remove the drain plug from the bottom. Bleed out all the residual water. Draining out of stagnant water regularly from the tank is necessary to go along your environment aseptic.
To clean the cooling pad, please unplug the cooler, apply low h2o pressure on the cooling pad from outside. Depending on the surrounding environment, clean the pad at least once or twice a yr.
Under no circumstances should the customer open up the libation. 8- In example of any difficulties, please refer to the contact information provided on the first folio.

Changing/Cleaning the filter pads:

Completely bleed the tank by removing the bleed plug located at the bottom of the tank.
Remove two screws of the air libation panel and accept out the cooling pad
It is recommended to clean the cooling pad regularly
Use a soft clammy material or soft plastic castor and a gentle spray of water.
Do not utilize high-pressure level jet h2o or acidic h2o for pad cleaning.

Wiring Diagram

How to change controller batteries

Press pad with pollex and slide battery cover off
Remove old batteries and insert new batteries according to the orientation shown on the controller.
Slide the cover dorsum into position, while pressing the pad.
WARNING
A. Do not mix sometime and new batteries.
B. Practise not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad, NiMH, etc) batteries.

Troubleshooting

Problem	Reason	Solution
No airflow	ane. Power is not connected. 2. Power is not turned ON. 3. Torso damaged.	ane. Plug in the power cable properly. 2. Printing the AirSpeed button to first. 3. Return to Service Center.
Aberrant Audio	i. Foreign article inside the body of the unit of measurement. ii. Loose air fan. 3. Motor defect.	1. Remove the rear embrace and wet pad, remove strange particles. two. Return to Service Eye. 3. Return to Service Eye.
No evaporation/Cooling	1. H2o tank is clogged. two. Other causes.	1. Clean the water tank. ii. Return to Service Heart.
Airflow direction cannot be controlled	The swing motor is defective.	Render to Service Centre

WARRANTY Information

Product Sr. No.
The warranties contained in this document ("the warranty") are provided voluntarily by Climate Technologies (every bit the manufacturer) to you lot (as a consumer) in relation to your buy of a product from Climate Technologies ("the product") and are in improver to whatever rights you may have under the Australian Consumer Police force or other applicable legislation. Delight read this warranty in full and consummate the Dealer/ Production information above. KEEP this with your original purchase receipt for any claim y'all may wish to make under this warranty.
Australian Consumer Law
The Product comes with consumer guarantees that cannot exist excluded under the Australian Consumer Law.
lf we breach these consumer guarantees, you are entitled (at your choice) to a replacement or refund in respect of a "major failure" (as that term is defined in section 260 of the Australian Consumer Law) of the Product. You are also entitled to have the Product repaired or replaced (at our choice) if the Product fails to be of acceptable quality and the failure does not amount to a "major failure".
The manufacturer's warranty contained in this booklet is in addition to any rights and remedies that you may take and may wish to rely on nether the Australian Consumer Police force or any other law in relation to the Product. No other person, visitor, entity or corporation is authorized to offer or give on our behalf, any other warranty.

Warranty Procedures

Firstly, refer to this owner's manual to ensure that yous accept followed the correct operating procedures of your product, and refer to the troubleshooting guide to assist in solving any problems yous may have.

Read this warranty statement advisedly before y'all asking warranty service as items related to installation are not covered by this appliance warranty.
Proof of product purchase must be provided by you to Climate Technologies when exercising any rights under this or any statutory or other warranty, every bit evidence that the apparatus is within the relevant manufacturer'due south warranty periods.
This warranty is merely for Climate Technologies products and associated original controls for Climate Technologies manufactured products.
Only an authorized Climate Technologies service provider may conduct out a warranty service.
To the extent permitted by police, any statutory warranty that applies to goods sold past Climate Technologies is valid for 12 months from the engagement of purchase and any additional warranties provided to you lot are at the sole discretion of Climate Technologies.

Climate Technologies provides the following Manufacturer's warranty on new products from the appointment of original buy in add-on to all implied warranties and other statutory rights which yous may have nether the Australian Consumer Constabulary and similar State & Territory Laws, discipline to the following terms and conditions.

Terms and Conditions
This warranty is subject to, and conditional upon, the following terms and conditions:

Subject to the exclusions noted, Climate Technologies warrant the production for the period equally prescribed in the tabular array beneath to be costless from inherent defects in materials and workmanship for functional and structural components.
This warranty is only valid if the product is operated and maintained in accord with the manufacturer's instructions
The appliance must not be modified or changed in any way.
Your proof of purchase MUST be produced before free service volition be provided together with a valid series number.
The product must exist registered within 30 days of purchase past following the instructions listed on the following page.
Traveling fourth dimension and mileage are included in the service within 30km of either your authorized Climate Technologies dealer or service provider'due south premises. Customers in areas other than the to a higher place are responsible for any traveling fourth dimension and mileage required to carry out warranty repairs.

Warranty Period

Product Model	Parts & Labour
Durango 125i	24 Months

Remote Location Warranty
If the product is located outside of the Climate Technologies service network, a supply office-only warranty will apply. Only parts will be supplied free of charge where the production the subject field of the warranty claim was located farther than 30km from the nearest Climate Technologies authorized dealer or service provider'south premises, and then only on the render of the faulty part. In the upshot that a warranty claim is made to which this provision applies, you lot will be responsible for all labor charges incurred for the role to be fitted past a qualified person, such equally a person to be appointed by Climate Technologies or one of their authorized dealers. The labor warranty prescribed in the table above of this warranty is void where the product in question has been installed in an area outside the Climate Technologies network (as prescribed in a higher place).

Consequence of this Warranty
If yous, as the purchaser of a product sold by Climate Technologies, comply with your obligations under this warranty document and a defect exists in a production you lot have purchased from Climate Technologies, Climate Technologies volition, at its sole discretion, repair or supplant the lacking product (or part of it). Any remedial work undertaken by Climate Technologies or one of its approved representatives or agents will be conducted at Climate Technologies' sole expense, subject field to the terms and weather condition and exclusions contained in this warranty. Climate Technologies will not reimburse you for any expense you lot have incurred in applying for a remedy under this warranty, including, but not limited to, any phone calls or stamp expenses incurred.

Exclusions to Warranty
The post-obit are non covered nether this warranty, and Climate Technologies takes no responsibility for the replacement or repair of:

Consumable items which are subject to wear and tear such as filter pads, drive belts, batteries, and bearings;
Any 3rd-party components used as part of the installation such as grilles, filters, fittings, pipework, etc. These items are warranted from your identify of the buy;
Damage caused past elements such as wind, rain, lightning, floods, etc along with power spiking and brownouts which are not considered by Climate Technologies in their sole discretion (acting reasonably) to be lacking material or workmanship;
Impairment caused by outside elements such equally pests, animals, pets, and vermin or similar that may crusade harm to the product;
Harsh environmental situations such equally salt air may cause cabinet damage and/or rusting.
Products used for commercial rental purposes or hire

Please be aware that to the extent permitted past police, the manufacturer does not accept liability or whatever claims for damage to building contents, carpet, walls, ceilings, foundations or any other consequential loss incurred past you or whatever other person every bit a outcome of the purchase or installation of a production from Climate Technologies or by any other means, whether such loss was incurred directly or indirectly. For the avoidance of uncertainty, damage resulting from power spikes, incorrect operation, incorrect installation, and incorrect maintenance is as well non covered under this warranty and such damage is not the responsibility of Climate Technologies.
All warranties contained in this warranty are given for the exclusive benefit of you as the purchaser of a Climate Technologies product and are non transferable and cannot be sold, assigned, gifted, or transferred in any other way.

Events where warranty may exist void
In the event that any of the following occur, this warranty may be void, and Climate Technologies reserves the right to refuse to repair or replace a defective production in accordance with a term of this warranty, where:

The product operates defectively due to failure of electricity or water supply,
The defect is caused by neglect, incorrect application, abuse, or past accidental damage to the product;
An unauthorized person has attempted to repair the appliance;
A situation arises which is referenced in the trouble-shooting guide (because you equally the purchaser are required to remedy such a state of affairs yourself).

Please note that a charge will be made for piece of work done or a service call made where the Climate Technologies authorized representative or agent determines at his/her sole discretion (acting reasonably) that there is nothing incorrect with the production in question.
How to exercise your rights nether this warranty
But qualified service personnel should conduct any service piece of work carried out on the Climate Technologies product. If y'all acquire a production or service from Climate Technologies which is defective, please contact Climate Technologies on the telephone numbers or emails listed beneath. Please note you will be required to show proof and provide usa with the product serial number and comply with the terms and conditions and all other applicable provisions of this warranty for Climate Technologies to proceed with the remedial activeness prescribed under this warranty.
Service-Hotline: 1300 665 087
e-mail us: [email protected].com.au
Volume a request online at: www.bonaire.com.au/support
Warranty on Replacement Parts
Parts replaced nether warranty are warranted for the residual of the original warranty flow.

WARRANTY REGISTRATION

Products must be registered inside 21 days from the engagement of buy. A re-create of your proof of buy must be submitted together with your registration. Please choose one of the iii options below to register your product for warranty as follows:
Pick 1
Scan the QR lawmaking below using your mobile device and fill out the online warranty registration course

Option2
Visit our website at: world wide web.bonaire.com.au/service and consummate our online warranty registration form
Option3
Fill out the details below and post this page together with a re-create of your proof of purchase to:
Climate Technologies
Warranty Registration Service
26 Nylex Avenue
Salisbury Due south
SA5106

Appointment of Purchase:________________________________________
Model :________________________________________________
Serial No:______________________________________________
Total Proper name:_____________________________________________
Address 1:______________________________________________
Address 1:______________________________________________
Suburb: State:___________________________________________
Post Code:_____________________________________________
due east-postal service:________________________________________________
Telephone No:__________________________________________
Mobile No:____________________________________________

CLIMATE TECHNOLOGIES
ABN 13 001418042
26 Nylex Avenue, Salisbury South Australia
5108
Commonwealth of australia
Customer Care: 1300 665 087

Documents / Resources

Source: https://manuals.plus/bonaire/durango-125-evaporative-portable-cooler-manual

Posted by: swansonmagery.blogspot.com